Unitech HT580 Manual do Utilizador descarregar pdf (Página 18)

Key

The Key setting is used to switch the functionality of the ENTER key, with that of the

ESCAPE key. Once this setting is enabled, the ESCAPE key will act as the ENTER

key, and the ENTER key will act as the ESCAPE key.

Modem

Unitech provides a modem cradle as an accessory for the HT580. With the cradle, a

user can transfer data through the phone line.

In general, a system administrator needs to setup a host PC to automatically dial out

to the modem cradle and issue the command for either data communication or remote

control. For such conguration, it is necessary to setup the device to automatically pick

the phone up when the host calls the modem. This is done with the “AUTO ANSWER”

option.

The user can also directly call the remote host PC from the modem cradle via the

HT580. To do this, it is necessary to set up the remote PC’s phone number in the

HT580.

Below is a list of the options for modem settings and a description of what they do.

ITEM DESCRIPTION

PHONE NUMBER To set up the remote PC’s phone number

AUTO ANSWER Send

ATS0=1 [enter] to modem cradle. The modem cradle will

automatically pick up the phone after one ring tone. You will get

an error message if HT580 is not plugged into the cradle or if

the modem cradle is powered off.

DIAL OUT D

ial Out calls the host PC. The PC must wait for a phone call.

HANG UP Hangs up the phone call

if the HT580 is connected.

Chapter 2 Using the Hardware

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 36 37

Sem comentários

Unitech HT580 Manual do Utilizador Página 18